#How to configure a hp jetdirect 170x manuals#
#How to configure a hp jetdirect 170x install#
#How to configure a hp jetdirect 170x windows#

It is used when printing from Windows NT using the HP IPC Internet Printer Connection software. IPP is a new Internet Printing Protocol implementation available on newer HP Jetdirect devices. While port 515 is the listen or destination port, TCP ports 721-731 are the source ports on the host machine.

This port can be used when printing with LPD (for example, from UNIX (R)) or using the Microsoft (R) LPR port monitor. Although ports 80, 280, or 631 continue for IPP (Internet Printing Protocol) use, other insecure communications are ignored. When enabled, SSL/TLS provides confidentiality, data integrity, and authentication for the communication between a Web browser and the Jetdirect Web server.

#How to configure a hp jetdirect 170x install#

Some HP software utilities use multicast and SLP to automatically discovery and automatically install a printer on the network. Newer HP Jetdirect devices use the SLP (Service Location Protocol) packet type for advertising their services. 427 UDP port for SLP (Service Location Protocol).The Jetdirect's SNMP trap destination IP address and this port number can be configured using Web Jetadmin or Telnet. Many SNMP Management utilities can be configured to capture traps. This port can be used when the network is configured to capture trap information. HP Jetadmin and HP Web Jetadmin use SNMP to configure and query the status of HP Jetdirect devices. This port can be accessed by any SNMP Management utility. The Embedded Web Server page allows a user to configure the HP Jetdirect using a supported browser. Newer HP Jetdirect devices have an embedded Web page in the firmware which can be accessed through this port. 80 HTTP port for EWS (Embedded Web Server).This port is used for configuration and upgrading the Jetdirect firmware. Port 67 is the BOOTP Server and port 68 is the BOOTP Client. 67 and 68 TCP ports for DHCP and BOOTP (they use the same client and server ports).

This port can be used for remote configuration of the HP Jetdirect device when there are no other configuration methods or it can be used to check the current configuration. Up to three simultaneous FTP sessions can be active at the same time. After the connection is established, in active mode FTP, a data connection will be made from port 20. Port 21 is the control port, which the Jetdirect will listen on for the initial connection. HP Jetdirect listens on TCP port 20 for FTP connection requests. These ports can be use to FTP files directly to Jetdirect print servers.

#How to configure a hp jetdirect 170x manuals#

Note that there are many different print servers and, unfortunately, many of the older print servers never had electronic versions of their manuals to make available on the Web. This capability depends on the model of the firmware as well as the firmware version of the print server.ДЇor more information on enabling the ports of a Jetdirect, see the manuals for your specific print server (some are available on the HP Web) - specifically the sections on using Telnet. Some of these ports (as well as protocols) can be disabled on certain HP Jetdirect print servers using the Jetdirect Embedded Web Server or Telnet. Some users may need to print through a router or a firewall and may need to allow access to these destination ports on a Jetdirect through those devices. The following are TCP and UDP destination port numbers (sometimes referred to as sockets) on the HP Jetdirect print servers. HP Jetdirect Print Servers - HP Jetdirect Port Numbers for TCP/IP (UDP) Connections